Version 4 SHEET 1 1888 1196 WIRE -64 -560 -208 -560 WIRE 48 -560 -64 -560 WIRE 544 -560 48 -560 WIRE -208 -544 -208 -560 WIRE 48 -512 48 -560 WIRE 240 -512 240 -528 WIRE 336 -512 336 -528 WIRE -208 -448 -208 -464 WIRE -64 -448 -64 -560 WIRE -16 -448 -64 -448 WIRE 544 -448 544 -560 WIRE 544 -448 496 -448 WIRE -272 -256 -384 -256 WIRE -160 -256 -272 -256 WIRE -64 -256 -160 -256 WIRE -16 -256 -64 -256 WIRE 544 -256 496 -256 WIRE 592 -256 544 -256 WIRE 704 -256 592 -256 WIRE 816 -256 704 -256 WIRE -384 -240 -384 -256 WIRE -272 -240 -272 -256 WIRE -160 -240 -160 -256 WIRE 592 -240 592 -256 WIRE 704 -240 704 -256 WIRE 816 -240 816 -256 WIRE -64 -160 -64 -256 WIRE -16 -160 -64 -160 WIRE 544 -160 544 -256 WIRE 544 -160 496 -160 WIRE -384 -144 -384 -160 WIRE -272 -144 -272 -176 WIRE -160 -144 -160 -176 WIRE 592 -144 592 -176 WIRE 704 -144 704 -176 WIRE 816 -144 816 -160 WIRE -16 -64 -32 -64 WIRE 512 -64 496 -64 WIRE -112 32 -144 32 WIRE -16 32 -48 32 WIRE 528 32 496 32 WIRE 624 32 592 32 WIRE 48 592 48 576 WIRE 336 592 336 576 WIRE 432 592 432 576 WIRE 48 688 48 672 WIRE 240 688 240 576 WIRE 240 688 48 688 WIRE 336 688 336 672 WIRE 336 688 240 688 WIRE 432 688 432 672 WIRE 432 688 336 688 FLAG -208 -448 0 FLAG 240 -528 0 FLAG 336 -528 0 FLAG -160 -144 0 FLAG -384 -144 0 FLAG -384 -256 OUT1 FLAG -272 -144 0 FLAG 592 -144 0 FLAG 816 -144 0 FLAG 816 -256 OUT0 FLAG 704 -144 0 FLAG -32 -64 0 FLAG 512 -64 0 FLAG 624 32 0 FLAG -144 32 0 SYMBOL voltage -208 -560 R0 SYMATTR InstName V1 SYMATTR Value 12 SYMBOL cap -176 -240 R0 WINDOW 123 25 58 Left 2 WINDOW 3 36 33 Left 2 SYMATTR Value2 X2 SYMATTR Value 330µ SYMATTR InstName C1 SYMATTR SpiceLine Rser=5m SYMBOL res -400 -256 R0 SYMATTR InstName R1 SYMATTR Value 20m SYMBOL cap -288 -240 R0 WINDOW 123 26 58 Left 2 WINDOW 3 37 33 Left 2 SYMATTR Value2 X3 SYMATTR Value 100µ SYMATTR InstName C2 SYMATTR SpiceLine Rser=5m SYMBOL cap 576 -240 R0 WINDOW 123 29 59 Left 2 WINDOW 3 39 34 Left 2 SYMATTR Value2 X2 SYMATTR Value 330µ SYMATTR InstName C3 SYMATTR SpiceLine Rser=5m SYMBOL res 800 -256 R0 SYMATTR InstName R2 SYMATTR Value 30m SYMBOL cap 688 -240 R0 WINDOW 123 28 61 Left 2 WINDOW 3 37 33 Left 2 SYMATTR Value2 X3 SYMATTR Value 100µ SYMATTR InstName C4 SYMATTR SpiceLine Rser=5m SYMBOL cap 592 16 R90 WINDOW 0 0 32 VBottom 2 WINDOW 3 32 32 VTop 2 SYMATTR InstName C5 SYMATTR Value 1n SYMBOL cap -112 16 M90 WINDOW 0 0 32 VBottom 2 WINDOW 3 32 32 VTop 2 SYMATTR InstName C6 SYMATTR Value 1n SYMBOL res 416 576 R0 SYMATTR InstName R3 SYMATTR Value 10K SYMBOL res 32 576 R0 SYMATTR InstName R4 SYMATTR Value 10K SYMBOL res 320 576 R0 WINDOW 3 25 80 Left 2 SYMATTR InstName R5 SYMATTR Value 4.99K SYMBOL PowerProducts\\LTM4700 240 32 R0 SYMATTR InstName U1 SYMATTR SpiceLine VIN_ON=5.5 VIN_OFF=5 Vout_0=1.5 Vout_1=1 Ilim0_range=1 Ilim1_range=1 OC_limit0=1 OC_limit1=1 Mode_ll=1 Fault_response=0 Retry_delay=.1m gm0=3m gm1=3m Rth0=5K Rth1=5K Sync=0 TEXT 928 -328 Left 1 ;Please read the following notes carefully, since the model presents different user interface\nthan the real part does.\n \n(1) All PMBus communication and memory address related functions and pins are not modeled. \n \n(2) Changes to all parameter values during the simulation running will not be in effect, unless the\nsimulation is stopped and restarted. This is different from the operation of the part, which will\n respond to the commanded changes while running. \n \n(3) Share_clk is not modeled. The default time reference of LTspice is used as the common time \nbase for all time related parameters.\n \n(4) The following parameters can be defined, by right-clicking the symbol of LTM4700. Different \nnomenclature from the datasheet is adopted here. If any value of these parameters are set beyond \nthe scope discribed in the datasheet, the resulting simulation outcomes are not meaningful.\n \n VIN_ON & VIN_OFF -- in volts, set the unit start/stop input voltages;\n Freq -- in Hz, sets switching frequency as one of values of 250K, 350K, \n 425K, 500K, 575K, 650K, 750K, 1000K. FSWPH_CFG pin needs to float \n (or short to VDD25), to make the value be in effect;\n PHs_0 & PHs_1 -- in degree, set phase angle related to SYNC signal. \n Certain combinations are restricted as in datasheet. FSWPH_CFG \n pin needs to float (or short to VDD25), to make the value be in effect;\n Ton0_delay & Ton0_rise; Ton1_delay & Ton1_rise -- in sec, set delay and soft-start timers for \n channel0 and channel1. Initialization time is not modeled;\n Toff0_delay & Toff0_fall; Toff1_delay & Toff1_fall -- in sec, set delay and soft-off timers for \n channel0 and channel1;\n Vout_0 & Vout_1 -- in volt, set output voltages respectively;\n Vout0_range & Vout1_range -- set maximum output range, with value 0\n for 4.096V (CH0) and 5.5V (CH1); value 1\n for 2.75V\n Ilim0_range & Ilim1_range -- set maximum sensed peak current range, with value 0\n for low, and 1 for high;\n OC_limit0 & OC_limit1 -- set ratio of peak current limit to the maximum value defined\n by Ilimit_range. It must be one of values: 0.5, 0.572, 0.642, \n 0.714, 0.786, 0.858, 0.928, 1;\n Mode_II -- sets light load operation mode: 0 for discontinuous, 1 for forced continuous;\n Fault_response -- sets the response mode of the unit to occuring faults:\n 0 for ignore, 1 for latch up, 2 for Hiccup after Retry_delay time;\n Retry_delay -- in sec, sets the timer before the unit turns on after a fault;\n gm -- transconductance of the error amplifier. It must be between 1m mho and 5.73m mho;\n Rth -- Compensation resistor. It must be set between 0k ohms and 62k ohms;\n Sync - value 0 for configuring module as Master, value 1 for Slave TEXT 928 488 Right 2 !.tran 1.2m startup